Water-cooled cutting power for brush management
The YLFKH-1000-31 combines a 9 kW water-cooled cutting-head motor and water-cooled controller with a 1,000 mm working width. Its tracked chassis and remote control support vegetation management without an onboard operator.
Choose the power configuration that fits the job
Two configurations are available for enquiry. The battery-only version is listed with approximately 30 kWh of battery energy. The generator-equipped version is listed with approximately 22 kWh and a 9.3 kW fuel-powered generator. Select the complete configuration as a package: battery, weight, dimensions and runtime differ.
Match the cutting setup to the vegetation
Horseshoe-type cutting tools are intended for grass, brush and light woody growth. Share the vegetation species, density and stem size so cutting suitability can be assessed for the proposed configuration.
Plan operation and charging
The generator-equipped version consumes fuel when its generator operates. Discuss charging supply, generator use, transport capacity and the daily work schedule before ordering. Runtime figures below are general supplier estimates; the source does not define a separate mowing and brush-clearing test cycle.
Choose your configuration
Specification Battery-only Generator-equipped
Battery energy Approximately 30 kWh Approximately 22 kWh
Battery capacity 430 Ah 314 Ah
System voltage 72 V 72 V
Estimated runtime Approximately 7 hours Approximately 5 hours
Dimensions (L × W × H) 2,080 × 1,250 × 640 mm 2,160 × 1,260 × 640 mm
Machine weight 855 kg 800 kg
Generator configuration No generator in the battery-only configuration 9.3 kW fuel-powered generator
Fuel tank Not applicable 6 L